Re: Mach1 and GTOCP4 Yellow Light


Ajay Narayanan <ajynrynn@...>
 

I had exactly the symptoms you describe with an AP900 and a CP3 controller. I called AP from the field and George's advice was to spread the prongs of the central pin of the power connector. I don't know if that applies to your CP4. I also notices that the battery terminals were a little corroded. So I spread the prongs with a pocket knife and cleaned the battery terminals. One of those fixed the issue and resulted in the controller seeing the correct voltage.

Ajay

Join main@ap-gto.groups.io to automatically receive all group messages.