> Is there a way to keep the rotation turning without a HC?  I am holding mouse on APCC pro to watch it turn but

On APCC's rate settings tab you can enter a custom tracking rate which the mount will continue to use until you change it or stop tracking.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Ron Kramer
> Sent: Friday, June 12, 2020 10:26 AM
> To: main@ap-gto.groups.io
> Subject: Re: [ap-gto] Mach1 Grease kit were? is it hiding on the site?
>
> Great thanks - removed it easily (lock down screws were TIGHT. !!!
>
> Is there a way to keep the rotation turning without a HC?  I am holding mouse on APCC pro to watch it turn but
> I'd like to keep it turning. O ordered kit.  will be here likely monday.
> I have a MS kit from amazon here but I read don't use "S" AERO grease.
>
>
> On Fri, Jun 12, 2020 at 12:24 PM uncarollo2 <chris1011@...> via groups.io
> <chris1011=aol.com@groups.io> wrote:
>
>
>       The gearbox is easy to grease. Just remove the cover and the pinion gears are exposed. You can clean
> them as often as you wish. The worm teeth are harder to get to.
>
>
>       Rolando
>
>
>
>
>       -----Original Message-----
>       From: Keith <keitholsen@...>
>       To: main@ap-gto.groups.io
>       Sent: Fri, Jun 12, 2020 11:10 am
>       Subject: Re: [ap-gto] Mach1 Grease kit were? is it hiding on the site?
>
>
>       Thanks Roland this is great.
>
>       Does the grease in the gear box need to be changed as often(or if at all) as the worm and worm wheel
> grease?
>
>       Keith
>
>
>
>
>
>
>
> --
>
> Ron Kramer
> https://www.facebook.com/Ron.R.Kramer
>
>