Re: PhD pulse guide error


Ray Gralak
 

Max,

There's not enough information to say. For example, did the failure message come from the driver or PHD2? Was the mount parked or tracking? If the scope is near the pole, RA moves will hardly produce any star movement. Also, have you tried looked at the driver log file to see if the PulseGuide moves were actually sent?

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Max Mirot via groups.io
Sent: Monday, May 25, 2020 7:13 AM
To: main@ap-gto.groups.io
Subject: [ap-gto] PhD pulse guide error

PhD guider connects to AP driver ok.
When I try to calibrate I started getting a error message that mount did not respond to pulse guiding (failed
message).
I close PhD then restart and reconnect the drivers. Calibration proceeds normally and guiding works all night.
I any suggestions?

Max

Join main@ap-gto.groups.io to automatically receive all group messages.