Re: Mach2 and PHD2 Guiding recommendations

Charles Thompson

Also, if you run the guiding assistant for a while (10 minutes+) it will recommended a different algorithm if it thinks a different one might be more appropriate than the current selection. 

Last week I ran it for a while on the 1100 and it recommended Lowpass2. It has never done that before though so it might be a new update. 


Sent from mobile device.

-------- Original message --------
From: "uncarollo2 <chris1011@...> via" <chris1011@...>
Date: 5/19/20 1:10 PM (GMT-06:00)
Subject: Re: [ap-gto] Mach2 and PHD2 Guiding recommendations

Try them, see which one works best for you. I have not had skies good enough for much imaging, and when it is clear I am usually testing other functions (modeling, unguided imaging etc).
If it's clear later this week I will do some PHD2 testing.


-----Original Message-----
From: Dean Jacobsen <deanjacobsen@...>
Sent: Tue, May 19, 2020 12:47 pm
Subject: Re: [ap-gto] Mach2 and PHD2 Guiding recommendations

Excellent, it sounds simple enough.  I use PHD2 now so the guide scope is set up.

I was also wondering about Mount Guide Algorithms for both RA and declination.  Last summer you were comparing hysteresis vs lowpass vs lowpass2 if I recall correctly.  Do you have a recommendation for the RA and for the declination algorithms?
Dean Jacobsen 
Image Gallery -
Astrobin - 

Join to automatically receive all group messages.