Roland,

this is the IP registered using the link “GTOCP4 Ethernet - Wifi Poll" :

wifi is set and connected :

the WiFi address is recognized by APCC:

…….But no recognition of the IP of the Ethernet connection by APCC :

…… and now, I can't change anything with “GTOCP4 Ethernet - Wifi Poll” .

Thank for your help to re-establish this ethernet connection.

Rémy

Le 11 avr. 2020 à 19:06, uncarollo2 <chris1011@...> via groups.io <chris1011@...> a écrit :

You may not be typing in the entire address. I normally use the "Find Mount" app. Comes up right away.

Rolando

-----Original Message-----
From: Chiri� R�my <remy.chirie@...>
To: main <main@ap-gto.groups.io>
Sent: Sat, Apr 11, 2020 11:51 am
Subject: Re: [ap-gto] ethernet connection troubles

Thanks Roland, but it doesn't work either.

And strangely enough, it only works when I select an automatic address (network and sharing, IPv4, DHCP) and at this time the address of the mount is well identified (by "Set up telescope" and “APCC") .... Surprising! 

But when I manually indicate this address (IPv4) of the mount, the mount is never recognized ... (?!) ...

Do you have any idea what might be going on?

Thank you.

Rémy

Le 11 avr. 2020 à 17:30, uncarollo2 <chris1011@...> via groups.io <chris1011@...> a écrit :

Cycle power to the mount and then connect.

Rolando

-----Original Message-----
From: Chiri� R�my <remy.chirie@...>
To: main <main@ap-gto.groups.io>
Sent: Sat, Apr 11, 2020 5:27 am
Subject: [ap-gto] ethernet connection troubles

Hi, I need some help.
For the past few days, I can no longer connect the GTOCP4 by Ethernet (Windows 10 OS, APV2 v5.30.09, APCC Pro v1.8.0.5). Several tests carried out with different cables without results, the connection by Ping (cmd: ping address) allowed me to check the good reception.
Do you have any suggestions to correct this situation, thank you.
Rémy