Re: Com ports #APCC

Phillip Klein

Thank you,
I did try selecting but the only choices were the ports already associated with the camera and focuser. There were no other choices.
I even tried auto select but that failed to connect when the other equipment was already attached.
Thank you

On Apr 7, 2020, at 6:55 AM, Charles Thompson via <cthomp97@...> wrote:

I've had this problem and went into the devices software and assigned it a higher comm port that was not in use. Then in windows go to device manager and advance options on that comm port and assign it to the matching port you used in the device software. It's been a long time but I think that's how I fixed it. 

Someone can correct me if I'm wrong. 


Sent from mobile device.

-------- Original message --------
From: klein.phillip@...
Date: 4/7/20 8:28 AM (GMT-06:00)
Subject: [ap-gto] Com ports #APCC


Recently, I purchased Astromi's MBoxV2. The device displays temp, pressure, humidity, dew point, latitude and longtitude. My equipment is AP Mach1 GTO4 mount running on APCCPro.
My problem is the new device is using the same com Port(3) that I use for my Optec FocusLynx so I cannot use both devices at the same time. ComPort(4) is used by the QSI532ws camera.
I am running Windows10 on a laptop that has 3 usb connections.
I would appreciate hearing if anyone has tackled a similar problem.

Thank you and wishing you clear skies!!


Join to automatically receive all group messages.