toggle quoted messageShow quoted text
Which model control box and hand controller do you use? Are they universal to all column models? My rig (127mm refractor AP-900 mount) is not that heavy would likely go with a single column. Not sure which one though.
On Mar 22, 2020, at 8:48 AM, Jack Huerkamp <Mallincamusa@...> wrote:
I just checked Ebay and there were several Linak lifting columns and accessories available. The key is getting a system with hand controller, control box, cables and lifting column. Also with dual column systems, they have to be synchronized so they work together, You can do that by running the columns to their lowest position, releasing the down button, and then holding down the down button for a few seconds. The columns will move downward slightly (about 1/16") and return. This is how I was told to synchronize them so that they work together. When the person I sold my original 1000 Newton system to received them, he noted that when fully extended one column was slightly taller than the other. After running the above sequence twice, the columns had reset and worked perfectly as a pair.