1. main@ap-gto.groups.io

Re: APCC rate settings

Cheng-Yang Tan
 

Hi Ray,
   FYI, your driver sees the update!

Inline image

cytan

On Friday, March 20, 2020, 10:07:21 PM CDT, Ray Gralak <groups3@...> wrote:


Hi Cytan,

I got the dump. Yes, IPV4 is enabled.

So something must be blocking the transfer, but I don't know what that could be. There are no hits from your IP address and no errors in the server's error log.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io
> Sent: Friday, March 20, 2020 8:01 PM
> Subject: Re: [ap-gto] APCC rate settings
>
> I just sent the info to Ray.
>
> cytan
>
> On Friday, March 20, 2020, 09:56:54 PM CDT, Bill Long <bill@...> wrote:
>
>
> Open CMD.exe and run this:
>
> ipconfig /all
>
> Then paste in the results into an email to Ray directly.
>
> ________________________________
>
> From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Cheng-Yang Tan via Groups.Io
> <cytan299=yahoo.com@groups.io>
> Sent: Friday, March 20, 2020 7:54 PM
> Subject: Re: [ap-gto] APCC rate settings
>
> Hi Ray,
>    You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it
> explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6.
>
>    Windows10 is at latest service pack and everything is up to date.
>
> cytan
>
> On Friday, March 20, 2020, 09:45:20 PM CDT, Ray Gralak <groups3@...> wrote:
>
>
> Brian and cytan,
>
> 1. I am wondering if you have IPV4 enabled on your LAN port?
>
> 2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework?
>
> -Ray Gralak
> Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606019629&sdata=lBKk8%2BSEFz%2BCe9KEq8tzImXJWqFfTI9CgIjwNSlIqE4%3D&r
> eserved=0>
> Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606029634&sdata=3iervM1WtC4d6dsFZT7xv6YqfUfOKTK9QB64dwY3oSc%3D&reserved=0>
> Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606029634&sdata=2ivRISzWZErLusFe7buaD5Mxu1Sv%2B8vhyfSS2eru2uE%3D&reserved=
> 0>
>
>
> > -----Original Message-----
> > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io] On Behalf Of
> Brian Valente
> > Sent: Friday, March 20, 2020 7:27 PM
> > Subject: Re: [ap-gto] APCC rate settings
> >
> > fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here
> >
> > On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote:
> >
> >
> >    Hi Ray,
> >      I added APCC to the firewall but the problem remains:
> >    Inline image
> >
> >    cytan
> >
> >
> >
> >    On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote:
> >
> >
> >    > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
> >
> >    AstroPhysicsCommandCenter.exe
> >
> >    -Ray Gralak
> >    Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606039648&sdata=aM%2FZfeF17TAQzpkbaUP3fLmHdJnBb6nKO2BIYfJn3Qs%3D&r
> eserved=0>
> >    Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606039648&sdata=tp2vS%2FlsqpS%2B4J18VxFiTkkoDTdTRSS2ucqXyP%2Br%2Bsg%3D&reserved=0>
> >    Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606049652&sdata=TiIeta1020YGk8DiTDm4Cwtga1Ifo%2BUs6%2B%2BdU%2BuETNQ%3D&r
> eserved=0>
> >
> >
> >    > -----Original Message-----
> >    > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io] On Behalf
> Of Cheng-Yang Tan via
> > Groups.Io
> >    > Sent: Friday, March 20, 2020 10:55 AM
> >    > Subject: Re: [ap-gto] APCC rate settings
> >    >
> >    > Hi Ray,
> >    >    Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks
> > Mac user :)
> >    > Here's the screen shot for the firewall settings on my Win 10:
> >    >
> >    > Inline image
> >    >
> >    > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
> >    >
> >    > cytan
> >    >
> >    >
> >    >
> >    > On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote:
> >    >
> >    >
> >    > Windows Defender Firewall can block applications. Without realizing the impact you might have clicked
> > yes to a
> >    > prompt that disabled APCC from being able to access the web. There is not much else that could prevent
> > APCC
> >    > from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't
> > updated
> >    > an optional update related to .Net framework.
> >    >
> >    > -Ray Gralak
> >    > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606049652&sdata=Qfzz44eu%2Bsqy7t3zIwvoV%2Ffd%2Fij2fHTbgRzt2ryanJE%3D&r
> eserved=0>
> >    > Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606059657&sdata=1izWYSNBYIO5Yxaud1eZhDelwCeCg8WN2tuvpcp9bqI%3D&reserved=0>
> >    > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606059657&sdata=xUoFELfEqy19cU8i4NJ1h0TBuW5IRqv0%2BJRnuEE4fp0%3D&reserved
> =0>
> >    >
> >    >
> >    > > -----Original Message-----
> >    > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io] On Behalf
> Of Cheng-Yang Tan via
> > Groups.Io
> >    > > Sent: Friday, March 20, 2020 10:37 AM
> >    > > Subject: Re: [ap-gto] APCC rate settings
> >    > >
> >    > > Hi Ray
> >    > >  I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on
> > Win10?
> >    > >
> >    > > cytan
> >    > >
> >    > > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote:
> >    > >
> >    > >
> >    > > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your
> > computer.
> >    > >
> >    > > Try turning AV off then try again.
> >    > >
> >    > > -Ray Gralak
> >    > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606069666&sdata=FTZM1Lc%2FB1RIVwozaPxqWiy8aIN%2B675utSAoeMOjN8U%3D
> &reserved=0>
> >    > > Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606069666&sdata=OBvNom9tDLeuraPdX7fp3IBYpYU2lb3CA3G6uBiZCVk%3D&reserved=0>
> >    > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606079671&sdata=6zOWLTccnKDQSYgebTLcV%2FYz51A0Jq2b5%2FPnxmUwxWU%3D&re
> served=0>
> >    > >
> >    > >
> >    > > > -----Original Message-----
> >    > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io] On
> Behalf Of Cheng-Yang Tan via
> > Groups.Io
> >    > > > Sent: Friday, March 20, 2020 9:45 AM
> >    > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> >    > > > Subject: Re: [ap-gto] APCC rate settings
> >    > > >
> >    > > > Hi Ray
> >    > > >    I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,>
> <https://www.siriusimaging.com,>
> > <https://www.siriusimaging.com,>
> >    > <https://www.siriusimaging.com,> but 1.8.0.4 does not see the
> >    > > update.
> >    > > >
> >    > > > cytan
> >    > > >
> >    > > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote:
> >    > > >
> >    > > >
> >    > > > No connection is required.
> >    > > >
> >    > > > You're computer/browser must be able to access https://www.siriusimaging.com.
> >    > > >
> >    > > > -Ray Gralak
> >    > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606079671&sdata=6WHu4aBMxXmVFe1N1Mu0nh1IDjbOrp3idN2wuQPhIuA%3D&res
> erved=0>
> >    > > > Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606089680&sdata=wB1HeuAfvnYU%2FmZ%2BCedOJ7sZO2e3gBoZTvc3fbORmUU%3D&reserved=0>
> >    > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606089680&sdata=GTbqu1ZEnHo76FVsMV07GTDXNihy0K7Z37zYoxFPYvM%3D&reserved
> =0>
> >    > > >
> >    > > >
> >    > > > > -----Original Message-----
> >    > > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io] On
> Behalf Of Konstantin von
> >    > > > > Sent: Friday, March 20, 2020 8:16 AM
> >    > > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> >    > > > > Subject: Re: [ap-gto] APCC rate settings
> >    > > > >
> >    > > > > Hi Ray,
> >    > > > >
> >    > > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are
> > available. Do I
> >    > > have
> >    > > > > to be connected to a mount?
> >    > > > >
> >    > > > > Konstantin
> >    > > > >
> >    > > > >
> >    > > > > Konstantin v. Poschinger
> >    > > > >
> >    > > > > Hammerichstr. 5
> >    > > > > 22605 Hamburg
> >    > > > > 040/8805747
> >    > > > > 0171 1983476
> >    > > > >
> >    > > > >
> >    > > > >    Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>:
> >    > > > >
> >    > > > >    Hi Brian,
> >    > > > >
> >    > > > >    When you run APCC it will indicate a new version is available in the title. Then from APCC's help
> > menu
> >    > > > > you can use Check for updates to get the download link.
> >    > > > >
> >    > > > >    -Ray Gralak
> >    > > > >    Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606099685&sdata=E%2BiQfKM5A8tby1LT8BQ%2BcHCnp5n4TfC2GFQAhQXoUCA%
> 3D&reserved=0>
> >    > > > >    Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606099685&sdata=juuzL1G3w%2Be410opEygk3XmLYTlBeylE2xd%2FSMZWU%2Bw%3D&reserved=0>
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606099685&sdata=juuzL1G3w%2Be410opEygk3XmLYTlBeylE2xd%2FSMZWU%2Bw%3D&reserved=0> >
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606109694&sdata=qrKU07DMQa7PIF8SHtHDv%2BcnTX7IP%2BEMJMNndwqjelk%3D&reserved=0> >
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606109694&sdata=qrKU07DMQa7PIF8SHtHDv%2BcnTX7IP%2BEMJMNndwqjelk%3D&reserved=0> >
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606119704&sdata=HrtaDN9h6ZyZU52BF0qEombtDxcYboCjJ7yYMIT718E%3D&reserved=0> >
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606119704&sdata=HrtaDN9h6ZyZU52BF0qEombtDxcYboCjJ7yYMIT718E%3D&reserved=0> >
> >    > > > >    Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606129713&sdata=Pxri8iOW7HNtxdtQVrIriaIonNzSACZfHdjqF%2BgeKzk%3D&reserved=0>
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >        -----Original Message-----
> >    > > > >        From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io] On
> Behalf Of Brian Valente
> >    > > > >        Sent: Thursday, March 19, 2020 8:39 PM
> >    > > > >        To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> >    > > > >        Subject: Re: [ap-gto] APCC rate settings
> >    > > > >
> >    > > > >        Ray where can we download this latest version?
> >    > > > >
> >    > > > >        AP site only has link to 1.8.0.5 right now
> >    > > > >
> >    > > > >        thanks -Brian
> >    > > > >
> >    > > > >        On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote:
> >    > > > >
> >    > > > >
> >    > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings
> > now;
> >    > > > > formerly
> >    > > > >        there
> >    > > > >        > were several more?
> >    > > > >
> >    > > > >        That was fixed in 1.8.0.8/9.
> >    > > > >
> >    > > > >        -Ray Gralak
> >    > > > >        Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606129713&sdata=CErKXfkGrtk5bCxG0ePWlQONph7%2Bs8cdjeE9mLoGuL8%3D&re
> served=0>
> >    > > > >        Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606139717&sdata=UL5K0xcR4Gy5KPoAZ%2FKacCd5dQbaog8Qk8TlK8GPM3w%3D&reserved=0>
> >    > > > >        Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606139717&sdata=76a3EFYZecW4WG8jtEeevDMw4ed%2BQvnU3il1JxH0z4c%3D&reserved
> =0>
> >    > > > >
> >    > > > >
> >    > > > >        > -----Original Message-----
> >    > > > >        > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io]
> On Behalf Of Peter Bresler via
> >    > > > > Groups.Io
> >    > > > >        > Sent: Thursday, March 19, 2020 8:11 PM
> >    > > > >        > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> >    > > > >        > Subject: [ap-gto] APCC rate settings
> >    > > > >        >
> >    > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings
> > now;
> >    > > > > formerly
> >    > > > >        there
> >    > > > >        > were several more?
> >    > > > >        >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >        --
> >    > > > >
> >    > > > >        Brian
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >        Brian Valente
> >    > > > >        portfolio brianvalentephotography.com <http://brianvalentephotography.com/
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606149722&sdata=q4lkAITUeJaxxigEjjPxe73dg%2B52QFmJJz2p65PnxJM%3D&reserved=0> >
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606149722&sdata=q4lkAITUeJaxxigEjjPxe73dg%2B52QFmJJz2p65PnxJM%3D&reserved=0>
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606159727&sdata=6gRCJiJ%2BPEwmHLS3h%2B7LeLwraZPdwAhex1RKPMhdfTg%3D&reserv
> ed=0> >
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606159727&sdata=6gRCJiJ%2BPEwmHLS3h%2B7LeLwraZPdwAhex1RKPMhdfTg%3D&reserv
> ed=0> >
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606169736&sdata=pSwkYYTzxPzykbZHkcR1VzdoQ587Dh1KWEYr6h0vqjw%3D&reserved=0> >
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606169736&sdata=pSwkYYTzxPzykbZHkcR1VzdoQ587Dh1KWEYr6h0vqjw%3D&reserved=0> >
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606179741&sdata=1dXIGVZodSvmeqKWVOKZeGmR%2FW7hKUOm92KtpJ%2B7wQ4%3D&res
> erved=0> > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > >
> >    > > >
> >    > > >
> >    > > >
> >    > > >
> >    > > >
> >    > >
> >    > >
> >    > >
> >    > >
> >    > >
> >    > >
> >    >
> >    >
> >    >
> >    >
> >    >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > --
> >
> > Brian
> >
> >
> >
> > Brian Valente
> > portfolio brianvalentephotography.com  <http://brianvalentephotography.com
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606179741&sdata=1dXIGVZodSvmeqKWVOKZeGmR%2FW7hKUOm92KtpJ%2B7wQ4%3D&res
> erved=0> >
> >
>
>
>
>
>
>



Join main@ap-gto.groups.io to automatically receive all group messages.