Re: APCC rate settings


Cheng-Yang Tan
 

I just sent the info to Ray.

cytan

On Friday, March 20, 2020, 09:56:54 PM CDT, Bill Long <bill@...> wrote:


Open CMD.exe and run this:

ipconfig /all 

Then paste in the results into an email to Ray directly. 


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Cheng-Yang Tan via Groups.Io <cytan299@...>
Sent: Friday, March 20, 2020 7:54 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] APCC rate settings
 
Hi Ray,
   You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6. 

   Windows10 is at latest service pack and everything is up to date.

cytan

On Friday, March 20, 2020, 09:45:20 PM CDT, Ray Gralak <groups3@...> wrote:


Brian and cytan,

1. I am wondering if you have IPV4 enabled on your LAN port?

2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework?

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente
> Sent: Friday, March 20, 2020 7:27 PM
> To: main@ap-gto.groups.io
> Subject: Re: [ap-gto] APCC rate settings
>
> fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here
>
> On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote:
>
>
>     Hi Ray,
>       I added APCC to the firewall but the problem remains:
>     Inline image
>
>     cytan
>
>
>
>     On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote:
>
>
>     > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
>
>     AstroPhysicsCommandCenter.exe
>
>     -Ray Gralak
>     Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     Author of PEMPro V3:  https://www.ccdware.com
>     Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>
>
>     > -----Original Message-----
>     > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via
> Groups.Io
>     > Sent: Friday, March 20, 2020 10:55 AM
>     > To: main@ap-gto.groups.io
>     > Subject: Re: [ap-gto] APCC rate settings
>     >
>     > Hi Ray,
>     >    Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks
> Mac user :)
>     > Here's the screen shot for the firewall settings on my Win 10:
>     >
>     > Inline image
>     >
>     > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
>     >
>     > cytan
>     >
>     >
>     >
>     > On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote:
>     >
>     >
>     > Windows Defender Firewall can block applications. Without realizing the impact you might have clicked
> yes to a
>     > prompt that disabled APCC from being able to access the web. There is not much else that could prevent
> APCC
>     > from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't
> updated
>     > an optional update related to .Net framework.
>     >
>     > -Ray Gralak
>     > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > Author of PEMPro V3:  https://www.ccdware.com
>     > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     >
>     >
>     > > -----Original Message-----
>     > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via
> Groups.Io
>     > > Sent: Friday, March 20, 2020 10:37 AM
>     > > To: main@ap-gto.groups.io
>     > > Subject: Re: [ap-gto] APCC rate settings
>     > >
>     > > Hi Ray
>     > >  I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on
> Win10?
>     > >
>     > > cytan
>     > >
>     > > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote:
>     > >
>     > >
>     > > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your
> computer.
>     > >
>     > > Try turning AV off then try again.
>     > >
>     > > -Ray Gralak
>     > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > > Author of PEMPro V3:  https://www.ccdware.com
>     > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     > >
>     > >
>     > > > -----Original Message-----
>     > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via
> Groups.Io
>     > > > Sent: Friday, March 20, 2020 9:45 AM
>     > > > To: main@ap-gto.groups.io
>     > > > Subject: Re: [ap-gto] APCC rate settings
>     > > >
>     > > > Hi Ray
>     > > >    I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,>
> <https://www.siriusimaging.com,>
>     > <https://www.siriusimaging.com,> but 1.8.0.4 does not see the
>     > > update.
>     > > >
>     > > > cytan
>     > > >
>     > > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote:
>     > > >
>     > > >
>     > > > No connection is required.
>     > > >
>     > > > You're computer/browser must be able to access https://www.siriusimaging.com.
>     > > >
>     > > > -Ray Gralak
>     > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > > > Author of PEMPro V3:  https://www.ccdware.com
>     > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     > > >
>     > > >
>     > > > > -----Original Message-----
>     > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Konstantin von
>     > > > > Sent: Friday, March 20, 2020 8:16 AM
>     > > > > To: main@ap-gto.groups.io
>     > > > > Subject: Re: [ap-gto] APCC rate settings
>     > > > >
>     > > > > Hi Ray,
>     > > > >
>     > > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are
> available. Do I
>     > > have
>     > > > > to be connected to a mount?
>     > > > >
>     > > > > Konstantin
>     > > > >
>     > > > >
>     > > > > Konstantin v. Poschinger
>     > > > >
>     > > > > Hammerichstr. 5
>     > > > > 22605 Hamburg
>     > > > > 040/8805747
>     > > > > 0171 1983476
>     > > > >
>     > > > >
>     > > > >    Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>:
>     > > > >
>     > > > >    Hi Brian,
>     > > > >
>     > > > >    When you run APCC it will indicate a new version is available in the title. Then from APCC's help
> menu
>     > > > > you can use Check for updates to get the download link.
>     > > > >
>     > > > >    -Ray Gralak
>     > > > >    Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > > > >    Author of PEMPro V3:  https://www.ccdware.com <https://www.ccdware.com>
> <https://www.ccdware.com> <https://www.ccdware.com>
>     > <https://www.ccdware.com>
>     > > <https://www.ccdware.com/>
>     > > > >    Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >        -----Original Message-----
>     > > > >        From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente
>     > > > >        Sent: Thursday, March 19, 2020 8:39 PM
>     > > > >        To: main@ap-gto.groups.io
>     > > > >        Subject: Re: [ap-gto] APCC rate settings
>     > > > >
>     > > > >        Ray where can we download this latest version?
>     > > > >
>     > > > >        AP site only has link to 1.8.0.5 right now
>     > > > >
>     > > > >        thanks -Brian
>     > > > >
>     > > > >        On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote:
>     > > > >
>     > > > >
>     > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings
> now;
>     > > > > formerly
>     > > > >        there
>     > > > >        > were several more?
>     > > > >
>     > > > >        That was fixed in 1.8.0.8/9.
>     > > > >
>     > > > >        -Ray Gralak
>     > > > >        Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>     > > > >        Author of PEMPro V3:  https://www.ccdware.com
>     > > > >        Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>     > > > >
>     > > > >
>     > > > >        > -----Original Message-----
>     > > > >        > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Peter Bresler via
>     > > > > Groups.Io
>     > > > >        > Sent: Thursday, March 19, 2020 8:11 PM
>     > > > >        > To: main@ap-gto.groups.io
>     > > > >        > Subject: [ap-gto] APCC rate settings
>     > > > >        >
>     > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings
> now;
>     > > > > formerly
>     > > > >        there
>     > > > >        > were several more?
>     > > > >        >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >        --
>     > > > >
>     > > > >        Brian
>     > > > >
>     > > > >
>     > > > >
>     > > > >        Brian Valente
>     > > > >        portfolio brianvalentephotography.com <http://brianvalentephotography.com/>
>     > > > > <http://brianvalentephotography.com <http://brianvalentephotography.com>
> <http://brianvalentephotography.com>
>     > <http://brianvalentephotography.com>
>     > > <http://brianvalentephotography.com>
>     > > > <http://brianvalentephotography.com/> >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > > >
>     > > >
>     > > >
>     > > >
>     > > >
>     > > >
>     > > >
>     > >
>     > >
>     > >
>     > >
>     > >
>     > >
>     >
>     >
>     >
>     >
>     >
>
>
>
>
>
>
>
>
>
>
>
>
> --
>
> Brian
>
>
>
> Brian Valente
> portfolio brianvalentephotography.com  <http://brianvalentephotography.com>
>




Join main@ap-gto.groups.io to automatically receive all group messages.