Re: APCC rate settings


Ray Gralak
 

>    You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it

> explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6.

 

It’s in windows, under Network Connections. For example, here is a screen shot from one of my computers. Find the proper network connection, right click and select properties. Make sure TCP/IPv4 is enabled

 

 

-Ray Gralak

Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro

Author of PEMPro V3:  https://www.ccdware.com

Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

 

 

> -----Original Message-----

> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io

> Sent: Friday, March 20, 2020 7:54 PM

> To: main@ap-gto.groups.io

> Subject: Re: [ap-gto] APCC rate settings

>

> Hi Ray,

>    You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it

> explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6.

>

>    Windows10 is at latest service pack and everything is up to date.

>

> cytan

>

> On Friday, March 20, 2020, 09:45:20 PM CDT, Ray Gralak <groups3@...> wrote:

>

>

> Brian and cytan,

>

> 1. I am wondering if you have IPV4 enabled on your LAN port?

>

> 2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework?

>

> -Ray Gralak

> Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro

> Author of PEMPro V3:  https://www.ccdware.com

> Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

>

>

> > -----Original Message-----

> > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente

> > Sent: Friday, March 20, 2020 7:27 PM

> > To: main@ap-gto.groups.io

> > Subject: Re: [ap-gto] APCC rate settings

> >

> > fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here

> >

> > On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299@...> wrote:

> >

> >

> >     Hi Ray,

> >       I added APCC to the firewall but the problem remains:

> >     Inline image

> >

> >     cytan

> >

> >

> >

> >     On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote:

> >

> >

> >     > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?

> >

> >     AstroPhysicsCommandCenter.exe

> >

> >     -Ray Gralak

> >     Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro

> >     Author of PEMPro V3:  https://www.ccdware.com

> >     Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

> >

> >

> >     > -----Original Message-----

> >     > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via

> > Groups.Io

> >     > Sent: Friday, March 20, 2020 10:55 AM

> >     > To: main@ap-gto.groups.io

> >     > Subject: Re: [ap-gto] APCC rate settings

> >     >

> >     > Hi Ray,

> >     >    Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks

> > Mac user :)

> >     > Here's the screen shot for the firewall settings on my Win 10:

> >     >

> >     > Inline image

> >     >

> >     > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?

> >     >

> >     > cytan

> >     >

> >     >

> >     >

> >     > On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote:

> >     >

> >     >

> >     > Windows Defender Firewall can block applications. Without realizing the impact you might have clicked

> > yes to a

> >     > prompt that disabled APCC from being able to access the web. There is not much else that could prevent

> > APCC

> >     > from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't

> > updated

> >     > an optional update related to .Net framework.

> >     >

> >     > -Ray Gralak

> >     > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro

> >     > Author of PEMPro V3:  https://www.ccdware.com

> >     > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

> >     >

> >     >

> >     > > -----Original Message-----

> >     > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via

> > Groups.Io

> >     > > Sent: Friday, March 20, 2020 10:37 AM

> >     > > To: main@ap-gto.groups.io

> >     > > Subject: Re: [ap-gto] APCC rate settings

> >     > >

> >     > > Hi Ray

> >     > >  I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on

> > Win10?

> >     > >

> >     > > cytan

> >     > >

> >     > > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote:

> >     > >

> >     > >

> >     > > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your

> > computer.

> >     > >

> >     > > Try turning AV off then try again.

> >     > >

> >     > > -Ray Gralak

> >     > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro

> >     > > Author of PEMPro V3:  https://www.ccdware.com

> >     > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

> >     > >

> >     > >

> >     > > > -----Original Message-----

> >     > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via

> > Groups.Io

> >     > > > Sent: Friday, March 20, 2020 9:45 AM

> >     > > > To: main@ap-gto.groups.io

> >     > > > Subject: Re: [ap-gto] APCC rate settings

> >     > > >

> >     > > > Hi Ray

> >     > > >    I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,>

> <https://www.siriusimaging.com,>

> > <https://www.siriusimaging.com,>

> >     > <https://www.siriusimaging.com,> but 1.8.0.4 does not see the

> >     > > update.

> >     > > >

> >     > > > cytan

> >     > > >

> >     > > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote:

> >     > > >

> >     > > >

> >     > > > No connection is required.

> >     > > >

> >     > > > You're computer/browser must be able to access https://www.siriusimaging.com.

> >     > > >

> >     > > > -Ray Gralak

> >     > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro

> >     > > > Author of PEMPro V3:  https://www.ccdware.com

> >     > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

> >     > > >

> >     > > >

> >     > > > > -----Original Message-----

> >     > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Konstantin von

> >     > > > > Sent: Friday, March 20, 2020 8:16 AM

> >     > > > > To: main@ap-gto.groups.io

> >     > > > > Subject: Re: [ap-gto] APCC rate settings

> >     > > > >

> >     > > > > Hi Ray,

> >     > > > >

> >     > > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are

> > available. Do I

> >     > > have

> >     > > > > to be connected to a mount?

> >     > > > >

> >     > > > > Konstantin

> >     > > > >

> >     > > > >

> >     > > > > Konstantin v. Poschinger

> >     > > > >

> >     > > > > Hammerichstr. 5

> >     > > > > 22605 Hamburg

> >     > > > > 040/8805747

> >     > > > > 0171 1983476

> >     > > > >

> >     > > > >

> >     > > > >    Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>:

> >     > > > >

> >     > > > >    Hi Brian,

> >     > > > >

> >     > > > >    When you run APCC it will indicate a new version is available in the title. Then from APCC's help

> > menu

> >     > > > > you can use Check for updates to get the download link.

> >     > > > >

> >     > > > >    -Ray Gralak

> >     > > > >    Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro

> >     > > > >    Author of PEMPro V3:  https://www.ccdware.com <https://www.ccdware.com>

> <https://www.ccdware.com>

> > <https://www.ccdware.com> <https://www.ccdware.com>

> >     > <https://www.ccdware.com>

> >     > > <https://www.ccdware.com/>

> >     > > > >    Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >        -----Original Message-----

> >     > > > >        From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente

> >     > > > >        Sent: Thursday, March 19, 2020 8:39 PM

> >     > > > >        To: main@ap-gto.groups.io

> >     > > > >        Subject: Re: [ap-gto] APCC rate settings

> >     > > > >

> >     > > > >        Ray where can we download this latest version?

> >     > > > >

> >     > > > >        AP site only has link to 1.8.0.5 right now

> >     > > > >

> >     > > > >        thanks -Brian

> >     > > > >

> >     > > > >        On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote:

> >     > > > >

> >     > > > >

> >     > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings

> > now;

> >     > > > > formerly

> >     > > > >        there

> >     > > > >        > were several more?

> >     > > > >

> >     > > > >        That was fixed in 1.8.0.8/9.

> >     > > > >

> >     > > > >        -Ray Gralak

> >     > > > >        Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro

> >     > > > >        Author of PEMPro V3:  https://www.ccdware.com

> >     > > > >        Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

> >     > > > >

> >     > > > >

> >     > > > >        > -----Original Message-----

> >     > > > >        > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Peter Bresler via

> >     > > > > Groups.Io

> >     > > > >        > Sent: Thursday, March 19, 2020 8:11 PM

> >     > > > >        > To: main@ap-gto.groups.io

> >     > > > >        > Subject: [ap-gto] APCC rate settings

> >     > > > >        >

> >     > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings

> > now;

> >     > > > > formerly

> >     > > > >        there

> >     > > > >        > were several more?

> >     > > > >        >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >        --

> >     > > > >

> >     > > > >        Brian

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >        Brian Valente

> >     > > > >        portfolio brianvalentephotography.com <http://brianvalentephotography.com/>

> >     > > > > <http://brianvalentephotography.com <http://brianvalentephotography.com>

> <http://brianvalentephotography.com>

> > <http://brianvalentephotography.com>

> >     > <http://brianvalentephotography.com>

> >     > > <http://brianvalentephotography.com>

> >     > > > <http://brianvalentephotography.com/> >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > > >

> >     > > >

> >     > > >

> >     > > >

> >     > > >

> >     > > >

> >     > > >

> >     > >

> >     > >

> >     > >

> >     > >

> >     > >

> >     > >

> >     >

> >     >

> >     >

> >     >

> >     >

> >

> >

> >

> >

> >

> >

> >

> >

> >

> >

> >

> >

> > --

> >

> > Brian

> >

> >

> >

> > Brian Valente

> > portfolio brianvalentephotography.com  <http://brianvalentephotography.com>

> >

>

>

>

>

>

Join main@ap-gto.groups.io to automatically receive all group messages.