Re: Mount Not Going To Park Position 3?


Bill Long
 

Aha! Time did recently change between the times we have been able to image here in the PNW (which is where Tony is at as well) I bet that is why.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of uncarollo2 <chris1011@...> via Groups.Io <chris1011@...>
Sent: Saturday, March 14, 2020 8:20 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] Mount Not Going To Park Position 3?
 
Normally a mount will never do what you are describing, even if you have a power loss during a slew. But this situation can occur if during a session you did a recal on a wrong position. It can occur if you did a time change during your session, or changed the daylight savings time. For each hour of time change or daylight savings the parks will move 15 degrees.
 
Rolando
 
 
-----Original Message-----
From: Tony Benjamin <tonybenjamin@...>
To: main <main@ap-gto.groups.io>
Sent: Sat, Mar 14, 2020 4:40 pm
Subject: Re: [ap-gto] Mount Not Going To Park Position 3?

Hi Peter,

Thanks. I'll give that a go - I was hoping that there would be something more automated for this - but I guess having AE's would solve this issue?

Join main@ap-gto.groups.io to automatically receive all group messages.