1. Messages
  2. APCC Pro MGBOX GPS connection

Re: APCC Pro MGBOX GPS connection #APCC

Tony Benjamin <tonybenjamin@...>
 

Yes, LOL. I sent the wrong JPEG J

 

From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Bill Long
Sent: March 8, 2020 3:19 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APCC Pro MGBOX GPS connection #APCC #APCC

 

Looks like its pretty cold where you are at. A whopping -271.3 C!

 

From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Tony Benjamin <tonybenjamin@...>
Sent: Sunday, March 8, 2020 3:16 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] APCC Pro MGBOX GPS connection #APCC #APCC

 

I have the MGBoxV2 GPS as well and using APCC Pro 1.8.0.5.

It all works properly for me.

When you say you have it on "COM 3" - shouldn't it be set to "MGBoxV2" under COM Port id APCC??


-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Ray Gralak
Sent: March 8, 2020 3:04 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APCC Pro MGBOX GPS connection #APCC #APCC

Hi Claude,

> For some strange reason when I try to connect to MGBOXv2 / GPS using
> APCC Pro 1.8.0.5 a dialogue pops up saying "Closing GPS Connection
> MGBoxV2: Cannot create ActiveX component." I have MGBOXV2 setup on Com
> 3 using the ASCOM chooser. I can connect to the environmental settings and a test shows the data comes in.

That usually means the MGBox ObservingConditions ASCOM driver is not installed, or not properly installed.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://nam12.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.astro-physics.com%2Findex.htm%3Fproducts%2Faccessories%2Fsoftware%2Fapcc%2Fapcc&amp;data=02%7C01%7C%7C3032bb2c77154f18a87008d7c3ae5567%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637193025826359198&amp;sdata=G46H7wf6RRg3uWNK%2FrSIe4ipyc8USvovl1If4tIpaUU%3D&amp;reserved=0
Author of PEMPro V3:  https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&amp;data=02%7C01%7C%7C3032bb2c77154f18a87008d7c3ae5567%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637193025826359198&amp;sdata=fuwHaKoFedqR1rn22Ud%2BpBEIiyYBsFozBt978Pxkf30%3D&amp;reserved=0 Author of Astro-Physics V2 ASCOM Driver: https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&amp;data=02%7C01%7C%7C3032bb2c77154f18a87008d7c3ae5567%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637193025826359198&amp;sdata=J%2BNwckDOGobIfqJHspAyYkCaWwv4rjhlrXORhJD2t0o%3D&amp;reserved=0


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Claude Benoit via Groups.Io
> Sent: Sunday, March 8, 2020 2:46 PM
> To: main@ap-gto.groups.io
> Subject: [ap-gto] APCC Pro MGBOX GPS connection #APCC #APCC
>
> For some strange reason when I try to connect to MGBOXv2 / GPS using APCC Pro 1.8.0.5 a dialogue pops up
> saying "Closing GPS Connection MGBoxV2: Cannot create ActiveX component." I have MGBOXV2 setup on
> Com 3 using the ASCOM chooser. I can connect to the environmental settings and a test shows the data comes
> in.
>
> Thanks for your thoughts on this.
> Claude
>






Join main@ap-gto.groups.io to automatically receive all group messages.