Re: Pointing and Error Correction turning off in APCC when parking at custom park position


Ray Gralak
 

I'm just a little confused as to where this should be used in ACP?

As the pointing & tracking correction turn off everytime the mount is parked,
the script would need to run after every unpark.
You would need to run it when unparking from the driver's custom park position. I can't tell you where that would be in ACP's script logic. You'll have to ask Bob Denny how/where to call the script if you want to do it in an automated way.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): http://www.astro-physics.com/index.htm?products/accessories/software/apcc/apcc
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of David Trappett via Groups.Io
Sent: Saturday, February 15, 2020 3:39 AM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] Pointing and Error Correction turning off in APCC when parking at custom park position

Thanks very much for this Ray,

I'm just a little confused as to where this should be used in ACP?

As the pointing & tracking correction turn off everytime the mount is parked, the script would need to run after every
unpark.

Regards,

DT

Join main@ap-gto.groups.io to automatically receive all group messages.