APPM and CCDSOFT

Worsel
 

Re:  Thread on "APPM has me stumped"

In that thread, I noted that I will try my SBIG ST-i again, rather than the ZWO.  Here is what happens

PHD2 and Ray's Enhanced PHD2 both find and connect to the ST-i via USB (there is no ASCOPM driver for the ST-i)
CCDSOFT finds and connects to the ST-i, but only as an Autoguider.  It cannot connect if the ST-i is selected as an Imager.

When the ST-i is connected to CCDSOFT as an Autoguider and APPM selects CCDSOFT as the Camera software, APPM cannot find the ST-i

The APPM Log file is below.

0000001 # AP Point Mapper v1.7.1.5
0000002 # APPM Log Starting: 2/7/2020 10:25:21 AM
0000003 2020-02-07 10:25:22.421:       Info,   ASCOM Version, Major version: 6
0000004 2020-02-07 10:25:22.421:       Info,   ASCOM Version, Minor version: 4
0000005 2020-02-07 10:25:22.421:       Info,   ASCOM Version, Service Pack: 0
0000006 2020-02-07 10:25:27.334:       Info,  Connect Driver, AP V2 Driver Version: 5.20.0009, Result: OK

Any insight here?

Bryan

Join main@ap-gto.groups.io to automatically receive all group messages.