Re: Mach 1 PEC enablement via iOS


Roland Christen
 


Alternatively, once pec is enabled does it stay enabled after power is cycled or is the state stored in non-volatile memory?
The PE curve remains in NVM and is always played back unless your specific application sends a command to turn it off (for instance, the keypad can be set to always turn it on at startup). If you do a new PEMPro run, the original curve can be saved by uploading it and storing it to your laptop, but once you load the new curve into the mount servo, the old curve will be erased and replaced by the new one.

Rolando


-----Original Message-----
From: kirthgersenwall@... [ap-gto]
To: ap-gto
Sent: Tue, Aug 7, 2018 10:58 pm
Subject: [ap-gto] Re: Mach 1 PEC enablement via iOS

Hello

I too am interested in the broad topic of iOS control from the perspective of standalone portable imaging.

I've read that the Luminos app can command AP mounts to traverse to any of their park positions, which may indicate a better level of base support.

Per the GTOCP4 manual, periodic error correction apparently defaults to off; the manual mentions APCC, the keypad and ASCOM can enable it, presumably defaulting to the factory installed curve for a new mount.

Are there any iPhone/pad options to do this? Alternatively, once pec is enabled does it stay enabled after power is cycled or is the state stored in non-volatile memory?

Thanks
Derek


------------------------------------
Posted by: kirthgersenwall@...
------------------------------------

To UNSUBSCRIBE, or for general information on the ap-gto list
see http://groups.yahoo.com/group/ap-gto
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ap-gto/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/ap-gto/join
(Yahoo! ID required)

<*> To change settings via email:
ap-gto-digest@...
ap-gto-fullfeatured@...

<*> To unsubscribe from this group, send an email to:
ap-gto-unsubscribe@...

<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/

Join main@ap-gto.groups.io to automatically receive all group messages.