Re: Can't access GTOCP4 again ?


Steve Reilly
 

Indeed it is. I copied and pasted without checking but down in the message it does have the correct update KB4056892 listed. My bad.

 

Steve

 

From: ap-gto@... [mailto:ap-gto@...]
Sent: Sunday, January 7, 2018 11:02 AM
To: ap-gto@...
Subject: RE: [ap-gto] Can't access GTOCP4 again ?

 

 

I see update KB405 6 892 on my system dated 1/5; not KB405 7 892.  Any chance this is a typo?

 

Charlie



---In ap-gto@..., <sreilly24590@...> wrote :

The update causing so much DCOM issues is Windows 10 Update KB4057892 and it causes Inter-Process Access Errors. Just passing along what I got….

 

Steve

 

 

From: ap-gto@... [mailto:ap-gto@...]
Sent: Sunday, January 7, 2018 10:05 AM
To: ap-gto@...
Subject: RE: [ap-gto] Can't access GTOCP4 again ?

 

 

Just out of curiosity is this on a Windows 10 system or network? Has anyone looked at MS attempt to fix the CPU venerability. Seems this has caused many issues but there is a work around that Bob Denny posted on the DC3-ACP Forum.

 

Steve

 

 

From: ap-gto@... [mailto:ap-gto@...]
Sent: Sunday, January 7, 2018 9:37 AM
To: ap-gto@...
Subject: RE: [ap-gto] Can't access GTOCP4 again ?

 

 

Hi Ron,

This link has some good examples of the kinds of Wi-Fi interference one might encounter:

https://support.metageek.com/hc/en-us/articles/200628894-WiFi-and-non-WiFi-Interference-Examples

Best regards,

-Ray Gralak
Author of APCC (Astro-Physics Command Center): http://www.astro-physics.com/index.htm?products/accessories/software/apcc/apcc
Author of PEMPro: http://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: http://www.gralak.com/apdriver
Author of PulseGuide: http://www.pulseguide.com
Author of Sigma: http://www.gralak.com/sigma

> -----Original Message-----
> From: ap-gto@... [mailto:ap-gto@...]
> Sent: Saturday, January 6, 2018 12:14 PM
> To: ap-gto@...
> Subject: Re: [ap-gto] Can't access GTOCP4 again ?
>
>
>
> Ron,
>
> As Steve suggested, have you considered running an Ethernet cable? 300ft is
> near the limit for Cat 6, so I don't think that a Wi-fi connection is going to be
> 100% reliable no matter what you try.
>
> -Ray Gralak
>
>
>
>
>
> Ray - I watch streaming HD video out there via wifi. No glitches, no down time.
> Steady - There is nothing more taxing on a network... (no glitches from all the
> other wifi devices in the dome.) I have a IP camera out there it's up 100% of the
> time, (HD) 24/7 no studders. It's a CHEAP 62.00 wifi IP camera. I connected it
> once a couple months ago - it's not had a hiccup. When the CP4 works - it says
> my signal strength is good when it doesn't say ??? and when it can find
> networks at all. I don't think anyone here really gets what I'm saying. The
> mount works (it's wired to my PC that is in the dome). I want to tap GOTO on my
> ipad via wifi. That might only be 3-4 ft from the CP4. No matter what - the fact
> that it can't reveal ANY of 8 networks in the area says to me it's faulty.
>
>
>
> On Sat, Jan 6, 2018 at 11:07 AM, 'Ray Gralak (Groups)' groups3@...
> [ap-gto] <ap-gto@...> wrote:
>
>
>
>
>
> Ron,
>
> As Steve suggested, have you considered running an Ethernet cable?
> 300ft is near the limit for Cat 6, so I don't think that a Wi-fi connection is going to
> be 100% reliable no matter what you try.
>
> -Ray Gralak
> Author of APCC (Astro-Physics Command Center): http://www.astro-
> physics.com/index.htm?products/accessories/software/apcc/apcc
> <http://www..astro-
> physics.com/index.htm?products/accessories/software/apcc/apcc>
> Author of PEMPro: http://www.ccdware.com
> Author of Astro-Physics V2 ASCOM Driver:
> http://www.gralak.com/apdriver
> Author of PulseGuide: http://www.pulseguide.com
> Author of Sigma: http://www.gralak.com/sigma
>
> > -----Original Message-----
> > From: ap-gto@... [mailto:ap-gto@...]
> > Sent: Saturday, January 6, 2018 7:13 AM
> > To: ap-gto@...
> > Subject: Re: [ap-gto] Can't access GTOCP4 again ?
> >
> >
> >
>
>
> > Power supply has been changed and upgraded as well. Howard logged
> in - did
> > some netbois killer and we moved the antenna out away from the pier
> (which is so
> > heavy its gravitational force doesn't let wifi signals out of it's magnetic
> field! ;-)
> > Really it's a old Losmandy stand and it's a lot of metal..
> >
> > So far "better" but oddly - passwords are not accepted when trying to log
> into my
> > other network to "test".
> > I've considered putting in a linksys mesh unit. (at least to try - if not
> better I could
> > return it to amazon).
> >
> > My router is the stock "Cable" netgear Antenna are internal only... I've
> moved and
> > rotated it around with various results. I get very good results from it with
> all other
> > devices. My neighbor has same and I see his network at the dome.
> (though
> > slightly weaker dbm signal).
> >
> > My network often reports a dbm signal of "???" which means there is
> something
> > CP4 doesnt' like about it. When it does show a actual number, it's a
> good signal of
> > around -30. My neighbor around -40. I do have another router here. A
> good
> > PEPWAVE unit.... it might be worth a test?
> >
> >
> > On Fri, Jan 5, 2018 at 4:57 PM, 'Joseph Zeglinski'
> J.Zeglinski@... [ap-gto]
> > <ap-gto@...> wrote:
> >
> >
> >
> >
> >
> >
> >
> > Ron,
> >
> > All I can say is --- WOW --- you have certainly been diligent !
> >
> > With so many things you have already tried, maybe it is time to get a ...
> > “well tested, certified working complete loaner (including its cables, just
> in case)”
> > from AP, and see if it is your location, the setup, this particular CP4 unit,
> or its
> > cables. I assume you have tried a totally different CP4 power source, in
> case there
> > are minor unnoticed fluctuations ?
> > Four months is enough time wasted. Certainly, been there this past
> year.
> >
> > Joe
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
>

Join main@ap-gto.groups.io to automatically receive all group messages.