-----Original Message-----
From: ap-gto@... [mailto:ap-gto@...]
Sent: Thursday, July 6, 2017 7:49 AM
To: ap-gto@...
Subject: AW: [ap-gto] GTO1100 CP4: No sync with mount after plate solving possible



Dear Ray,



https://www.dropbox.com/s/ru4zprppw0hkuam/APCC-2017-07-06-014243.txt?dl=0



KR

Thomas



Von: ap-gto@... [mailto:ap-gto@...]
Gesendet: Donnerstag, 6. Juli 2017 16:02
An: ap-gto@...
Betreff: RE: [ap-gto] GTO1100 CP4: No sync with mount after plate solving possible





Hi Thomas,

I think you will need to use the APCC log zipper to collect the logs. If you can put that in a public dropbox link
that would be great.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): http://www.astro-
physics.com/index.htm?products/accessories/software/apcc/apcc
Author of PEMPro: http://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver:
http://www.gralak.com/apdriver Author of PulseGuide: http://www.pulseguide.com Author of Sigma:
http://www.gralak.com/sigma

-----Original Message-----
From: ap-gto@... <mailto:ap-gto@... m>
[mailto:ap-gto@...]
Sent: Thursday, July 6, 2017 6:31 AM
To: ap-gto@...
Subject: Re: [ap-gto] GTO1100 CP4: No sync with mount after plate
solving possible



CP4: VCP4-P01-04

KR

Thomas

Am 06.07.2017 um 15:18 schrieb 'Ray Gralak (Groups)'
groups3@... [ap-gto] <ap-
gto@...>:





Hi Thomas,

CP4: 322

That doesn't look like a firmware version. The CP4 firmware is displayed in APCC or the driver.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): http://www.astro-
physics.co m/index.htm?products/accessories/software/apcc/apcc
Author of PEMPro: http://www.ccdware.com Author of Astro-Physics V2
ASCOM Driver: http://www.gralak.com/apdriver Author of PulseGuide:
http://www.pulseguide.com Author of Sigma: http://www.gralak.com/sigma

-----Original Message-----
From: ap-gto@... [mailto:ap-gto@...]
Sent: Thursday, July 6, 2017 6:07 AM
To: ap-gto@...
Subject: Re: [ap-gto] GTO1100 CP4: No sync with mount after plate
solving possible



Hello Ray,

APCC: v1.5.0. 20
ASCOM V2: v5.09.09
CP4: 322


KR

Thomas

Am 06.07.2017 um 14:26 schrieb 'Ray Gralak (Groups)'
groups3@... [ap-gto] <ap-
gto@...>:

Every time I got following error message from APCC Pro:

"Sync Target: Valid Alt/Az or RA/Dec has not been received."

This can be caused by several things. Which versions of the driver,
APCC, and GTOCP4 were you using?

-Ray Gralak
Author of APCC (Astro-Physics Command Center): http://www.astro-
physics.com/index.htm?products/accessories/software/apcc/apcc
Author of PEMPro: http://www.ccdware.com Author of Astro-Physics V2
ASCOM Driver: http://www.gralak.com/apdriver Author of PulseGuide:
http://www.pulseguide.com Author of Sigma:
http://www.gralak.com/sigma

-----Original Message-----
From: ap-gto@... [mailto:ap-gto@...]
Sent: Thursday, July 6, 2017 12:40 AM
To: ap-gto@...
Subject: [ap-gto] GTO1100 CP4: No sync with mount after plate
solving possible



Dear all,

I tried last night several times to do a syncronisation after a
plate solving with SGP Pro and

PlateSolve2.

Every time I got following error message from APCC Pro:

"Sync Target: Valid Alt/Az or RA/Dec has not been received."

Everything else works fine so far.

Thanks for your comments.

KR
Thomad