Re: Changed chip, now keypad doesn't work


Don Anderson
 

Of course that's true as well. Still sounds like an electrical connection problem.
 
Don Anderson



From: "'Christopher Erickson' christopher.k.erickson@... [ap-gto]"
To: ap-gto@...
Sent: Sunday, January 29, 2017 8:13 PM
Subject: RE: [ap-gto] Re: Changed chip, now keypad doesn't work

 
The hand controller battery also powers an RTC (real time clock) module.
 
 
Christopher Erickson
Consulting Engineer
Summit Kinetics
Waikoloa, HI 96738
www.summitkinetics.com
 


From: ap-gto@... [mailto:ap-gto@...]
Sent: Sunday, January 29, 2017 5:10 PM
To: ap-gto@...
Subject: [ap-gto] Re: Changed chip, now keypad doesn't work

John
Doesn't sound like a hand controller battery problem. The hand pad battery simply maintains the databases when the keypad is not plugged into the mount. It sounds more like a bad connection in the hand controller cable or in the cable plug either at the mount end or inside the keypad where the cable plugs onto the circuit board. I would call George at AP and discuss with him before proceeding further.
I am sure it is a simple thing.

 Good luck 
Don Anderson
 


Join main@ap-gto.groups.io to automatically receive all group messages.