-----Original Message-----
From: ap-gto@... [mailto:ap-gto@...]
Sent: Wednesday, June 22, 2016 5:56 AM
To: ap-gto@...
Subject: RE: [ap-gto] vserial7.sys BSOD



Thanks Ray,



I'll contact Eltima but for the record I don't use registry cleaners of

use CCleaner for removal of temp file s and so on but not their registry

Eltima a screen shot of the files I found and their location but not the

as it hasn't been requested. What I have received is this reply:



"The latest version is 8.0.412. If you are running an older release,

updating: http://www.eltima.com/download/vspd.exe <http://www.
eltima.com/download/vspd.exe> . There is a chance that this problem is

fixed."





Thanks,



Steve



From: ap-gto@... [mailto:ap-gto@...]
Sent: Wednesday, June 22, 2016 8:40 AM
To: ap-gto@...
Subject: RE: [ap-gto] vserial7.sys BSOD





Steve,

It's a third party DLL that gets installed by APCC (like a C++ DLL from
Microsoft, or the .NetFramework).

I don't have the source code for it nor am I setup for system level
debugging on my computer so I can't help you with debugging a low
system-level Windows BSOD. Probably the only support you can get for a

is from Eltima, whose engineers will likely want you to give them the
windows dump file. The BSOD could be caused by many things, including

used 3rd-party registry and system cleaners in the past, or some other DLL
that is interfering. I believe that only Eltima engineers would be able to
identify the driver's crash point with what line of code in their driver
caused it.

-Ray Gralak
Author of APCC (Astro-Physics Command Center):

cc
Author of PEMPro: http://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: http://www.gralak.com/apdriver
Author of PulseGuide: http://www.pulseguide.com
Author of Sigma: http://www.gralak.com/sigma

-----Original Message-----
From: ap-gto@... <mailto:ap-gto@yahoogroups .com>

[mailto:ap-gto@...]

Sent: Wednesday, June 22, 2016 5:28 AM
To: ap-gto@...
Subject: RE: [ap-gto] vserial7.sys BSOD



Ray,

I'm a little confused. Is vserial7 a driver that is installed with APCC?

See

And shouldn't it be updated via Windows update if it's listed under

Windows

drivers?

Thanks,

Steve

From: ap-gto@... [mailto:ap-gto@...]
Sent: Wednesday, June 22, 2016 8:24 AM
To: ap-gto@...
Subject: RE: [ap-gto] vserial7.sys BSOD

Chris/Steve,

I would not go to the Solvuso ft web site or use their products. Norton
blocked the site as dangerous when I tried to go to it. AVG confirms:

https://safeweb.norton.com/report/show?url=solvusoft.com

om

Also, a little research shows that there have been some weird licensing
issues reported by some users (e.g. licenses expiring prematurely, etc.)

solvusoft-products-safe/16248403-5608-47ff-85c8-9088537f1d7a

-Ray Gralak
Author of APCC (Astro-Physics Command Center):

cc
Author of PEMPro: http://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: http://www.gralak.com/apdriver
Author of PulseGuide: http://www.pulseguide.com
Author of Sigma: http://www.gralak.com/sigma

-----Original Message-----
From: ap-gto@... <mailto:ap-gto@...>

[mailto:ap-gto@...]

Sent: Wednesday, June 22, 2016 5:07 AM
To: ap-gto@yahoogroup s.com <mailto:ap-gto@...>

<mailto:ap-gto@...>

Subject: RE: [ap-gto] vserial7.sys BSOD



Thanks guys, I'll look into both links.



Steve





From: ap-gto@... <mailto:ap-gto@...>

[mailto:ap-gto@...] Sent:
Tuesday,

June 21, 2016 11:05 PM
To: ap-gto@... <mailto:ap-gto@...>
Subject: RE: [ap-gto] vserial7.sys BSOD





This might help with Eltima d river BSOD's:

software/eltima-virtual-serial-ports/evserial-sys/

Christopher Erickson
Consulting Engineer
Summit Kinetics
Waikoloa, HI 96738
www.summitkinetics.com <http://www.summitkinetics.com>

-----Original Message-----
From: ap-gto@... <mailto:ap-gto@...>

[mailto:ap-gto@...]

Sent: Tuesday, June 21, 2016 4:07 PM
To: ap-gto@... <mailto:ap-gto@...>
Subject: RE: [ap-gto] vserial7.sys BSOD

Steve,

Contact Eltima support (http://www.eltima.com/). They are the vendor

that

driver.

-Ray Gralak
Author of APCC (Astro-Physics Command Center):

cc
Author of PEMPro: http://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver:

Author of PulseGuide: http://www.pulseguide.com

& gt; > Author of Sigma: http://www.gralak.com/sigma

-----Original Message-----
From: ap-gto@yahoogr oups.com <mailto:ap-gto@...>

[mailto:ap-

gto@... <mailto:gto@...> ]

Sent: Tuesday, June 21, 2016 5:08 PM
To: ap-gto@... <mailto:ap-gto@...>
Subject: [ap-gto] vserial7.sys BSOD



Seems lately if I connect TheSkyX to my mount using a virtual serial

port

in APCC I

end up with a Blue Screen Of Death with a message that vserial7.sy s

was

the cause

and a long string of numbers and letters. Using Everything to search

my

system and

APCC shows up as the only program using this file. It's happened a

number

of times

and I can't swear it hasn't when TheSkyX wasn't connected. The last

two

times

TheSkyX was definitely connected. This doesn't seem to be an

issue after

connecting but rather sometime afterward. I can't say the telescope

was

doing

anything at the time of failure as it is likely running s ome

tasks

through ACP.

I can go out and restart the computer and reconnect everything

issue. Not

sure where to go from here. Suggestions welcomed.



Steve> > >

------------------------------------
Posted by: "Ray Gralak &#92;(Groups&#92;)" <groups3@...

<mailto:groups3@...%0b> > <mailto:groups3@...> >

------------------------------------

To UNSUBSCRIBE, or for general information on the ap-gto list
see http://groups.yahoo.com/group/ap-gto
------------------------------------

Yahoo Groups Links