Re: pem pro query


Steven
 

I've already checked that. After entering 'something' or other in the open field, it seems to take it in, then immediately re-appears before I can get to PemPro front window.

S




From: ap-gto@... on behalf of 'Ray Gralak (Groups)' groups3@... [ap-gto]
Sent: Monday, 4 January 2016 10:55 p.m.
To: ap-gto@...
Subject: RE: [ap-gto] pem pro query
 
 

Hi Steve,

BTW, the Mount Wizard window will come up if you press the F8 key. You
should make sure you don't have any keystroke macros that send that key.

-Ray Gralak
Author of APCC (Astro-Physics Command Center):
http://www.astro-physics.com/index.htm?products/accessories/software/apcc/ap
cc
Author of PEMPro: http://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: http://www.gralak.com/apdriver
Author of PulseGuide: http://www.pulseguide.com
Author of Sigma: http://www.gralak.com/sigma

> -----Original Message-----
> From: ap-gto@... [mailto:ap-gto@...]
> Sent: Monday, January 04, 2016 7:51 PM
> To: ap-gto@...
> Subject: Re: [ap-gto] pem pro query
>
>
>
> No worries,
>
> Steve
>
>
>
>
> ________________________________
>
> From: ap-gto@... on behalf of 'Ray
> Gralak (Groups)' groups3@... [ap-gto]
> Sent: Monday, 4 January 2016 10:43 p.m.
> To: ap-gto@...
> Subject: RE: [ap-gto] pem pro query
>
>
>
> Steve,
>
> Why don't we move this to the PEMPro forum so you can post a screen shot
of
> what you are seeing?
>
> http://ccdware.infopop.cc/eve/forums/a/frm/f/401101098
>
> -Ray Gralak
> Author of APCC (Astro-Physics Command Center):
>
http://www.astro-physics.com/index.htm?products/accessories/software/apcc/ap
> cc
> Author of PEMPro: http://www.ccdware.com
> Author of Astro-Physics V2 ASCOM Driver: http://www.gralak.com/apdriver
> Author of PulseGuide: http://www.pulseguide.com
> Author of Sigma: http://www.gralak.com/sigma
>
> > -----Original Message-----
> > From: ap-gto@... [mailto:ap-gto@...]
> > Sent: Monday, January 04, 2016 7:19 PM
> > To: ap-gto@...
> > Subject: Re: [ap-gto] pem pro query
> >
> >
> >
> > Sadly, Ray, this has had no effect at all.
> >
> >
> >
> >
> > Steve
> >
> >
> >
> >
> > ________________________________
> >
> > From: ap-gto@... on behalf of
> 'Ray
> > Gralak (Groups)' groups3@... [ap-gto]
> > Sent: Monday, 4 January 2016 9:56 p.m.
> > To: ap-gto@...
> > Subject: RE: [ap-gto] pem pro query
> >
> >
> >
> > Steve,
> >
> > I've never heard of that behavior before. It could be the mount
definition
> > file is corrupted.
> >
> > To see if that is the problem:
> >
> > 1) Close PEMPro if it is running.
> > 2) In Windows explorer, navigate to your MyDocuments\CCDWare\PEMProV2
> > folder.
> > 3) Delete or rename the file named "Mounts.Def"
> > 4) Restart PEMPro, and create a new mount instance.
> >
> > -Ray Gralak
> > Author of APCC (Astro-Physics Command Center):
> >
>
http://www.astro-physics.com/index.htm?products/accessories/software/apcc/ap
> > cc
> > Author of PEMPro: http://www.ccdware.com
> > Author of Astro-Physics V2 ASCOM Driver: http://www.gralak.com/apdriver
> > Author of PulseGuide: http://www.pulseguide.com
> > Author of Sigma: http://www.gralak.com/sigma
> >
> > > -----Original Message-----
> > > From: ap-gto@... [mailto:ap-gto@...]
> > > Sent: Monday, January 04, 2016 2:48 PM
> > > To: ap-gto@...
> > > Subject: Re: [ap-gto] pem pro query
> > >
> > >
> > >
> > > Ray, by 'callilng up a session', means I'm opening PemPro to use it
> > initially. The
> > > Ap1100GTO session is already defined on the main window, but it still
> > calls up the
> > > first window I described below, and despite my completing it again and
> > again
> > > (humouring it, because the software already has AP1100GTO), it wants
me
> to
> > > complete the information again, so I put in AP1100GT again, it takes
it,
> > then gives
> > > me the same open window and won't allow me past it no matter how many
> > times I
> > > complete it. Ultimately, I can't use PemPro, that window is in the way
> and
> > won't let
> > > me proceed no matter what I put in it.
> > >
> > >
> > >
> > >
> > > Steve
> > >
> > >
> > >
> > >
> > > ________________________________
> > >
> > > From: ap-gto@... on behalf of
> > 'Ray
> > > Gralak (Groups)' groups3@... [ap-gto]
> > > Sent: Monday, 4 January 2016 8:37 a.m.
> > > To: ap-gto@...
> > > Subject: RE: [ap-gto] pem pro query
> > >
> > >
> > >
> > > HI Steve,
> > >
> > > > I like PemPro used it many times. All of a sudden, now, every time I
> > call
> > > up a
> > > > session,
> > >
> > > Can you be more specific about "call up a session? By that do you mean
> > > loading a log file?
> > >
> > > Also, do you have any mounts defined? If not, the Mount Wizard prompt
> may
> > > keep popping up to ask you. In that case just define one.
> > >
> > > -Ray Gralak
> > > Author of APCC (Astro-Physics Command Center):
> > >
> >
>
http://www.astro-physics.com/index.htm?products/accessories/software/apcc/ap
> > > cc
> > > Author of PEMPro: http://www.ccdware.com
> > > Author of Astro-Physics V2 ASCOM Driver:
http://www.gralak.com/apdriver
> > > Author of PulseGuide: http://www.pulseguide.com
> > > Author of Sigma: http://www.gralak.com/sigma
> > >
> > > > -----Original Message-----
> > > > From: ap-gto@... [mailto:ap-gto@...]
> > > > Sent: Monday, January 04, 2016 3:19 AM
> > > > To: ap-gto@...
> > > > Subject: [ap-gto] pem pro query
> > > >
> > > >
> > > >
> > > > Ray,
> > > >
> > > >
> > > >
> > > >
> > > > I like PemPro used it many times. All of a sudden, now, every time I
> > call
> > > up a
> > > > session, before I can get a keystroke in edge-wise, the Mount Quick
> Step
> > > Wizard
> > > > (Step 1) comes up and won't go away until I 'satisfy' it with
details.
> > > Then as soon
> > > > as I press "Finish", the same empty window comes back again for the
> same
> > > > routine. Bottom line is I can't get into PemPro to use it. What you
> > think?
> > > >
> > > > Steve
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
>
>
>
>

Join main@ap-gto.groups.io to automatically receive all group messages.