Re: Parallel Mounting on a AP1100


Christopher Erickson
 

I should add that I have put a C14 and an AP 130EDF-GT side-by-side using the TGAD on my 900GTO.
 
Rock solid and very-easy to align the two scopes on the same object.  Or at least as well as a C14 with floating primary will allow.
 
 
Christopher Erickson
Consulting Engineer
Summit Kinetics
Waikoloa, HI 96738
www.summitkinetics.com
 


From: Christopher Erickson [mailto:christopher.k.erickson@...]
Sent: Thursday, February 12, 2015 8:35 AM
To: 'ap-gto@...'
Subject: RE: [ap-gto] Parallel Mounting on a AP1100

I have a Robin Casaday TGAD that does this, if you can find one used.
 
 
ADM sells something similar called the DSBS-MAX and the DSBS-MiniMAX.
 
 
 
Christopher Erickson
Consulting Engineer
Summit Kinetics
Waikoloa, HI 96738
www.summitkinetics.com
 


From: ap-gto@... [mailto:ap-gto@...]
Sent: Thursday, February 12, 2015 7:23 AM
To: ap-gto@...
Subject: [ap-gto] Parallel Mounting on a AP1100

Just wondering about the feasibility of mounting two scopes in parallel on my AP1100. For example,  5" refractor and a small (9") CAT or another wide-field refractor. If it's feasible, suggestions as to hardware and methods for alignment so each scope is pointing at the same place. Thanks!

Join main@ap-gto.groups.io to automatically receive all group messages.