AP1200 wrong park position


Randy <rzugnoni@...>
 

Hi All,

I am having a problem with my AP1200 returning to the correct Park 3 position. I have tried resetting the Park positions by leveling the scope at Park 1 then going through the procedures to set that position. It goes to the correct Park 3 position after doing that.

However, after a 3-4 hour imaging run the mount doesn't return to the correct Park 3 position. It is off by about 5 to 10 degrees.

I was hoping that someone could give me some suggestions as to what to look for.

Any help would be appreciated.

Thanks,

Randy

Join main@ap-gto.groups.io to automatically receive all group messages.