Re: An easier Pasillx N & S Polar Alignment method- NOW New Gear Cutting Procedu
|
Roland Christen
Hmmmm, this old fart wonders if you will use the new Gear Cutting
toggle quoted message
Show quoted text
Method on the AP1200s just now entering production? We always apply new techniques to our products. They evolve, along with our scopes. Rolando -----Original Message-----
From: tucstargzr <tucstargzr@...> To: ap-gto@... Sent: Sat, 20 Sep 2008 11:40 am Subject: [ap-gto] Re: An easier Pasillx N & S Polar Alignment method- NOW New Gear Cutting Procedu --- In ap-gto@..., chris1011@... wrote:
The production worm on this 3600 mount is made with a new gearSNIP cutting method that we developed here after much testing, and it produced a raw periodic error of under 2 arc seconds without PEM in a 5 minute worm cycle. <<<<snip RolandoHmmmm, this old fart wonders if you will use the new Gear Cutting Method on the AP1200s just now entering production? Tom Ye Olde Fart from Tucson, AZ ------------------------------------ To UNSUBSCRIBE, or for general information on the ap-gto list see http://groups.yahoo.com/group/ap-gtoYahoo! Groups Links |
|
|