Re: Wish List

Dick Steinberg

Not only does this make sense, but it answers the original request for
a way to put the keypad back in control after using a planetarium
program slew.

THANKS, Roland!

Dick Steinberg

--- In ap-gto@..., chris1011@... wrote:

In a message dated 9/16/2008 6:58:34 PM Central Daylight Time,
nemecl@... writes:

BTW, the Gemni hand controller coexists happily with the planetarium
program, it even syncs (or additional aligns) with an object
selected by the
program calling it a 'PC object' - its coordinates have to be
to Gemini for a slew, after all.
BTW, the AP keypad aslo coexists happily with the planetarium
program. It
even syncs (or recals) with an object selected by the program,
calling it a
custom 'RA/Dec' - its coordinates also have to be communicated to
the AP keypad
after all.

So, how does one do this? In the Objects Menu window, one presses
This automatically uploads the present RA/Dec number to the keypad.
To set the
internal keypad to this new position, simply exit (press Menu),
press bottom
right hand button, then press Rcal. This sets the internal RA/Dec of
the keypad
to the same location as is on the computer screen. If the object is
not in the
center of the eyepiece or CCD image, you can center the object
further using
the direction buttons. Once it is centered, press Rcal again to
define this
new position as the original RA/Dec. You will see on the planetarium
that as you center the object in the eyepiece via the buttons, the
cursor will
move away from the object center on the screen, and as soon as you
press Rcal,
the cursor will move back to the center of the object on your
screen. With this simple method you have essentially "Synced" the
program, the mount internal position and where the scope is really

The point of this is simple: if you want the keypad to do a recal,
then you
must set it up so that the last object in the keypad memory IS the
one you are
pointing to. If you point to something with a planetarium program,
then the
only way the keypad knows this is for it to monitor the position of
the servo
via the RA/DEC=> also known as the digital setting circle readout.

Does this make sense?


Psssst...Have you heard the news? There's a new fashion
blog, plus the latest fall trends and hair styles at


[Non-text portions of this message have been removed]

Join to automatically receive all group messages.