Re: Broken clutch knob


Bob Olson <r.olson@...>
 

Hi Pete,

Be very careful that the pilot drill doesn't wander off the hard clutch screw and into the soft aluminium casting. I believe the clutch screw is stainless steel and it might work harden when it is being drilled. You might want to consider having a machine shop do the job.

I think that you can use the mount as it is, so you might want to wait until the AP folks get back from their Christmas holidays, and then check with them.

Bob

Join main@ap-gto.groups.io to automatically receive all group messages.