Re: Runaway mount


Kent Kirkley
 

In a message dated 9/29/07 8:20:40 PM, peter@... writes:


It's a simple JMI focus motor plugged into the AP900, then controlled
via the mount and the ASCOM driver. It *should* work with focusMax.

Pete
So the JMI focus motor is just getting its power from the AP900.
That doesn't mean the mount is controlling the focus motor.
If there are power problems with the power to the mount then that might have
an influence on the power to the focus motor..

Kent Kirkley



**************************************
See what's new at http://www.aol.com

Join main@ap-gto.groups.io to automatically receive all group messages.