Yes, I was going to do this but the page says there is a password so
I have to call AP and give them my serial number to get it. I hope
that works

--- In ap-gto@..., "tucstargzr" <tucstargzr@...> wrote:

Dean,

I'm new to the Goto mounts, but a few days ago
http://tech.groups.yahoo.com/group/ap-gto/message/18896

Did you ever verify which version you're using? Current is 4.12.
The software version scrolls immediately after powerup.

Dowload from AP the Keypad_V412.pdf, and then the flash update. On
page 11 and 12 of the Keypad instruction manual it details the

fixes

(top of page 12 mentions "N-S-E-W buttons will work correctly")

Hope this helps.

Tom

--- In ap-gto@..., "Dean Salman" <cluster@> wrote:

This is now serious problem. I have changed power supplies and

there

seems to be no issue with the gears. The software in the mount

is

4.0x, is that the problem. This happens at any speed including

1x

and

both axis. I do know someone with a 1200 mount near by so I

guess

I

can change out parts but this is looking like a mount issue, not

the

control box or key pad.


--- In ap-gto@..., "Dean Salman" <cluster@> wrote:

When I use the keypad, sometimes the mount will continue to

slew

so I

have to press stop. I thought it was the key pad but

PulseGuide

did

the same thing without the keypad. Someone told me it was in

the

controler box. So far I have not seen this using the Sky or

CCD

Commander. Anyway thoughts ?

Dean