Re: Balance Procedure


Dick Steinberg <steinberg@...>
 

I have successfully used the following:

1. Slew the mount to the park 1 position (with locked clutches).
2. Precisely note the positions of the setting circles.
3. For each axis, loosen the clutches and balance without disturbing
the positions of the setting circles.
4. After each axis is balanced, use its setting circle to return it
manually to its prior position and lock the clutches.
5. Voila!

Regards,
Dick Steinberg











--- In ap-gto@yahoogroups.com, "spcrichey" <drichey@...> wrote:

What's the procedure for rebalancing. If I have very good polar
alignment and a good
pointing accuracy, but need to loosen the clutces and reblance the
load due to adding
equipment, how do I maintain my pointing model.

Join main@ap-gto.groups.io to automatically receive all group messages.